Mechanical / Hall-effect confusion
Hall-effect boards need compatible magnetic switches and firmware behaviour. A familiar stem shape does not make a contact switch compatible.
48 REVIEWED SWITCH RECORDS / 3 NON-INTERCHANGEABLE SYSTEMSHOW SPECIFICATIONS ARE SOURCED
BEFORE YOU BUY SWITCHES
Start with the keyboard model, not a list of socket terms.
Choose a supported keyboard and a switch. The result points to the exact manufacturer evidence used, stops known system conflicts, and leaves uncertain variants open.
MODEL-BASED RESULTCompatible on the published system and pin fields
WHY
Compatible on the published system and pin fields
- Keychron publishes support for almost all 3-pin and 5-pin MX mechanical switches.
- G Pro 3.0 Red is recorded as 3-pin.
- Confirm the exact Q1 Max version and check plate and housing clearance for unusual switch bodies.
- Keyboard source
- Keychron product/support page ↗
- Source checked
- 2026-08-20
- Switch source
- Gateron source ↗
The result uses only the exact fields published by the cited manufacturer pages. “Supported” is not an independent electrical or clearance test.
My keyboard is not listed — open the manual field check
Use this only when you can read the switch system, socket family, pin and clearance details from your keyboard documentation.
COMPATIBILITY RESULTWe still need the exact socket and switch family
WHAT TO DO NEXT
We still need the exact socket and switch family
- Find the keyboard manual or PCB socket specification.
- Find the exact switch product page or data sheet.
- Do not purchase a full set from a generic low-profile, HE or MX label.
- MX-style keycap stem shape alone does not establish electrical, PCB or plate compatibility.
This check uses only the details you enter. Confirm the exact keyboard manual and current switch specifications before buying or modifying parts.
Three common reasons a switch will not fit
Low-profile mismatch
Low-profile families vary in height, pin position, plate opening and keycap system. Treat each board and switch family as its own specification.
Five-pin assumptions
A plate-mounted board may accept three-pin switches while a five-pin switch needs compatible PCB holes. Clipping legs is irreversible and is not an automatic recommendation.